   |
|
|
|
| MODEL TNL4848X-5K WITH PALLET JACK RAMPS |
|
|
|
CAPACITIES - 1,000 lb. through 25,000 lb. & specials
PLATFORM SIZES - 24" X 24" through 96" X 108" & specials
CONSTRUCTION - Fabricated steel - Free standing, adjustable feet
LOAD SENSING - Single ended shear beam electronic load cells
SAFETY - Designed for 200 % loading before load cell damage
NTEP - Type approved - Legal for trade
| |
|
|
Pacific's TUF-N-LOW floor scale is "state of the art" electronic weighing. The modern low design is ideal for floor top. A 20 foot signal cable to the weigh meter is standard; however longer cables are available.
The TUF-N-LOW floor scale can be easily moved from place to place. Either hand truck it or run the lift truck forks under it, un-plug the weigh meter and go. At the new site adjust the feet so there is no rocking of the platform and plug in the weigh meter.
For those permanent locations it may be recessed flush with the floor. The rugged design - 100 % end loading - insures long, trouble free use even in the roughest service.
TUF-N-LOW floor scales are National Type Approved and legal for use in trade in all 50 states.
TNL floor scales are tested and calibrated before shipping. Installation is a matter of placing the scale, adjusting the feet, plug the weigh meter into the signal cable and into power.
Custom sizes and capacities are available - If you have a requirement for a non-standard scale, give us a call. | |
|
|
|
|
| STAINLESS TUF-N-LOW FLOOR SCALES | |
| NTEP - Legal For Trade - stainless steel TUF-N-LOW floor scales from 30" X 30" to 48" X 48" - capacities 1,000 lb. to 5,000 lb. | |
|
|
|
|
| ALUMINUM TUF-N-LOW FLOOR SCALES | |
|
NTEP - TUF-N-LIGHT - Legal for trade - aluminum scales available in sizes from 30" X 30" to 48" X 48" and capacities from 1,000 lb. to 5,000 lb. | |
|
|
|
|
| OTHER PACIFIC SCALE PRODUCTS | |
|
|
|
|
